As new Condition
Legendary Pre Amp 
Gain: 0, 6, 12, or 18dB in the line input stage
Volume control range: 80.0dB (maximum)
Gain resolution: 0.1dB steps above 23.0 in display (–57dB)
Input overload: 1.0dB steps below 23.0 in display (–57dB)
when gain is set to +18dB: 1.6V on XLR, 0.8V on RCA3.3V on XLR, 1.6V on RCA6.6V on XLR, 3.3V on RCA13.2V on XLR, 6.6V on RCA100kless than 50less than 0.001%
when gain is set to +12dB:
when gain is set to +6dB:
when gain is set to 0dB:
 
<90dB (any input to any output, input terminated)
<-94dBV (20Hz to 20kHz, input terminated)
10Hz-40kHz: ±0.2dB
50 watts maximum
100V, 120V, 220V, or 230V, factory set for destination country
50 or 60Hz, factory set for destination country
(3) pairs balanced on XLR
(4) pairs single-ended on RCA
(1) pair balanced main output on XLR
(1) pair single-ended main output on RCA
(2) pairs record outputs on RCA
(2) link communication (one 8-pin modular RJ-45 connector for "slave-in"
and one 8-pin modular RJ-45 connector for "slave-out")
(1) phono ground on binding post
(1) IR input on 3.5mm miniature phone connector
(1) trigger programmable output on 3.5mm miniature phone connector
(12V level or 5V pulse)
(1) RS-232 on 6-pin RJ-11 modular connector
(1) AC input on IEC-standard AC mains receptacle
width: 17.75" (45.1cm)
height: 2.915" (7.4cm)
depth: 14.05" (35.7cm)
30lb (14kg)
Hand-held infrared remote control unit
Requires 2 AAA batteries (Alkaline batteries recommended).
*Nº326S phono input option is available at additional charge.
When installed, input 7 becomes the phono input.
Unless otherwise noted, specifications reflect nominal values over 20Hz to 20kHz measured
bandwidth on balanced XLR connections